Can Seam Inspection Equipment by
Longueville, Pound Lane, Smeeth, Ashford, Kent. TN25 6RJ. England
Tel: +44 (0)1303 813200 Mobile 07776 251493 E-mail: firstname.lastname@example.org
Service Engineers Portable Beverage Can Sectioning Saw.
Portable beverage can sectioning saw has been specifically designed for service Engineers,to be as light and powerful as practically possible.
The beverage saw has a unique cutting design to achieve
Longer blade life resulting in precise cutting repetition
Reduce cutting movement saving time
Cost Effective Blades (H.S.S. M35 100 x 22 x 0.5 x 280 Teeth)
Quick Change Seam Fixtures
Blade support to eliminate lateral movement of blades
The linear bearing cutting table has a seam fixture, this has an internal chuck angle to
locate the beverage can firmly and ensures that the cans are consistently cut through the centre line of the can.
Available in 110 volts version.
Both hands have to be employed while cutting
Removable power cord (230 Volts)
Illuminated mains On / Off switch
Spring return blade guard
Ultra low voltage control circuits
Push button (Automatic off return)
Can proximity sensor (No Can, No Start)
Waste cutting material container sensor (No Container, No Start)
High visibility saw tool / safety kit carrying case / toolbox
4 Off seam fixtures
4 Off spare saw blades ( M35 H.S.S. 100mm OD x 22mm ID x 0.50mm thick x 280 teeth ).
of flat nose pliers
Blade change 24AF spanners
T-bar M5 Allen socket wrench
Easy clean stainless steel cabinet
Dimension: Length 280mm Width 210mm Height 180mm
Weight 9Kg (19.8lbs)
Free running at 800mm 65dB Cutting at 800mm 100bB (1to2 Seconds)